Home

Top 4 Common Toilet Problems

The toilet in your home is usually made of a bowl unit that sits on your floor, as well as an upper tank that holds the water that is released each time you flush. It is quite convenient if both units work as you expect them to but it can be quite frustrating to encounter toilet-related problems. This article lists down some of the most common toilet problems that you need to be aware of, as well as what you can do to address each one.

Clogged Toilet

One of the most common toilet issues that you may face is a clogged toilet. The experts in toilet repairs Canberra locals often recommend suggest that you can try to use a plunger to try to clear the clog. However, it cannot address the problem, then you should consider calling a seasoned plumber to prevent the risk of facing a bigger toilet problem later on. To prevent this problem from happening in the future, avoid flushing paper towels or sanitary wipes that can cause a clog. Rather, make sure to dispose of these items in the trash.

Toilet Not Flushing

Another common toilet issue that you may face is a toilet that is not flushing. In this case, you can check the flush handle because it can just be either too tight or too loose. You can also check the flush lever to see if any adjustments need to be made or a replacement is necessary. Another thing that you need to check is the lift chain to verify if it is still correctly attached to the flapper and the lift arm. You may have to untangle if needed. You can also replace the flapper sealing the flush valve opening if it is already warped or damaged.

Toilet Leaks

A toilet leak is also a common toilet problem. There are instances wherein the water can leak into the bowl but sometimes, the leaks may prove to be quite difficult to detect. The only time that you will be aware of this problem is when your water bill shoots up. Before this happens, try to perform the food colour test on your tank. If there is a leak, you will see the coloured water in your bowl.

Some of the most common causes of a toilet leak is a flapper that is improperly attached in the valve seat, as well as a failed gasket. In this case, all you need to do is to tighten the flapper or replace the gasket. Otherwise, you can also ask a plumber to check your toilet to figure out any other potential causes of the leak.

Running Toilet

Another toilet issue that can take a significant toll on your water bill is a running toilet, which means that the water continuously flows through the tank through the fill valve. In this case, you may need to check the flapper because if it is not sealing the opening of the flush valve, then water may continuously leak into the bowl. If the problem persists even after you replace the flapper, you may need to replace the entire flush valve assembly.

The toilet problems listed above are some of the most common ones that you need to be aware of. There are some other issues still such as your toilet does not fill or the water in the bowl drops, which can both be attributed to a damaged fill tube or a cracked toilet bowl. Rest assured that for any of these issues, you can simply get in touch with a seasoned and reliable local plumber in Canberra who will be able to address your needs promptly.

Leave a Reply

Enter Captcha Here : *

Reload Image